Description of product | These lathes WF6194B are suitable mainly for turning internal and external cylindrical,taper and other swing surfaces as well as various metuic,whitworth,module and diametric pitch threads.They can also be used for broaching oil grooves and keyways.There are also following features: |
1. The side wall of bed is constructed with doublerib plates.and the shae of internal ribs is of box type and bevel ribs combination.The rigidity is higher than that of ordinary lathes.The precision is stable.And these lathes can carry out strong force cutting. |
2. On apron,there is a device,operated by a single lever,used for rapid traverse of the carriage.Spindle's braking and rotating direction change is controlled by hydraulic system,or by hand operation,all to user's choice. |
3. The saddle guide way is gluded by "TSF" soft belt wear resisting materrials. |
4. On user's demand,we can equip the lathe with automatic feeding mechanism.The top slide can be used independently for turning of short taper surface.in combination with longitudinal feeding.it can also turn long taper surface. |
WF6194B | Working Scope |
Swing over bed | mm | 940 |
Swing over carriage | mm | 660 |
Maximum length of workpiece | mm | 750 |
Maximum turning length | mm | 600 |
Swing over gap | mm | 1100 |
Effective width of gap | mm | 300 |
Width of guideway | mm | 550 |
Spindle |
Spindle nose code | . | 11 |
Diameter of spindle thru hole | mm | 100 |
Taper hole of spindle | mm | 120 |
Range of spindle speeds | r/min | 6-800 |
Number of spindle speeds | . | 18 |
Feed motion |
Longitudinal and cross feeds | mm/r | 64;0.1-24.32 |
Cross-to-longitudinal feed rate | . | 1月2日 |
Screw pitch of leadscrew | mm | 12 |
Number and range of metric thread | mm | 50;1-240 |
Number and range of inch thread | . | 26;14-1(TPI) |
Number and range of module thread | mm | 35;0.5-44 |
Number and range of diametrical pitch thread | . | 24;28-1(TPI) |
Rapid traverse speed of carriage | mm/min | 4000 |
Tool post |
Max.travel of cross slide | mm | 570 |
Max.travel of top slide | mm | 200 |
section of tool shank | mm | 32×35 |
Tailstock |
Diameter of Tailstock quill | mm | 100 |
Travel of tailstock quill | mm | 250 |
Taper Hole of Tailstock quill | Morse | 5 |
Main motor power | kw | 11 |
Machine mass | kg | 3900 |
Machine overall dimensions(lenght×width×height) | mm | 2960×1473×1690 |
Acceptance Conditions |
JB/T4020-1997 Alluracy Parallel Lathe |
JB/T2322.2-93 Terms Parallel Lathe |